Handleiding
Je bekijkt pagina 30 van 78
English - 29 -
the remote. Highlight the desired
channel/s on the list and press OK to
select/unselect.
Channel Swap: Replace the positions
of the two selected channels in the
channel list. Highlight the desired
channels on the list and press OK to
select. When the second channel is
selected, the position of this channel
will be replaced with the position of
the first selected channel. You can
press the Yellow button and enter the
number of the channel you want to
select. Then highlight OK and press OK
to go to that channel. You may need
to set the LCN option to O in order
to enable this feature.
Channel Move: Move a channel to the
position of another channel. Highlight
the channel you want to move and
press OK to select. Then do the same
for a second channel. When the second
channel is selected, you can press the
Blue button and the first selected
channel will be moved to the position
of that channel. When the confirmation
dialogue appears, highlight YES and
press OK to proceed. You can press the
Yellow button and enter the number of
the channel you want to select. Then
highlight OK and press OK to go to
that channel. You may need to set the
LCN option to O in order to enable
this feature.
Channel Edit: Edit channels in the
channel list. Edit the name and channel
number (*) of the selected channel
and display Network Name, Channel
Type and Frequency information
related to that channel if available.
Depending on the channel other
options may also be editable. Press
OK or the Yellow button to edit the
highlighted channel. You can press the
Blue button to delete the highlighted
channel.
(*) The selected channel number should
not be used for another channel in the
channel list. You may need to set the
LCN option to O in order to change
the channel number.
Channel Delete: Highlight the desired
channel/s on the list and press OK or
the Yellow button to select/unselect.
Then press the Blue button to delete
the selected channel/s. When the
confirmation dialogue appears,
highlight YES and press OK to proceed.
Clear Channel List: Delete all channels
stored in the channel list. A dialogue
will be displayed for confirmation.
Highlight OK and press OK to proceed.
Highlight Cancel and press OK to
cancel.
Input Source - Cable
Channel Scan: Start a scan for
digital cable channels. If available,
operator options will be listed. Select
the desired one and press OK. Scan
Mode, Frequency and Network ID
options may be available. The options
may vary depending on the operator
and the Scan Mode selections. Set the
Scan Mode as Full if you don’t know
Bekijk gratis de handleiding van Vestel 24HA9950Y, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestel |
| Model | 24HA9950Y |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 7400 MB |
