Handleiding
Je bekijkt pagina 31 van 78
English - 30 -
how to set up other options. Highlight
Scan and press OK or the Right
directional button to start the scan.
You can press the Back/Return button
to cancel the scan. The channels that
have already been found will be stored
in the channel list.
Single RF Scan: Enter the Frequency
value. Signal Level and Signal Quality
of the selected Frequency will be
shown. Highlight the Scan option and
press OK or the Right directional button
to start scan. The found channels will
be stored in the channel list.
LCN: Set your preference for LCN. LCN
is the Logical Channel Number system
that organises available broadcasts in
accordance with a recognisable channel
number sequence (if available).
Channel Scan Type: Set your scan
type preference.
Channel Store Type: Set your store
type preference.
Favourite Network Select: Select
your favourite network. This menu
option will be active, if more than
one network is available. This option
may not be available depending on
the selected country during the initial
setup process.
Channel Skip: Set channels to be
skipped when switching the channels
via Programme +/- buttons on
the remote. Highlight the desired
channel/s on the list and press OK to
select/unselect.
Channel Swap: Replace the positions
of the two selected channels in the
channel list. Highlight the desired
channels on the list and press OK to
select. When the second channel is
selected, the position of this channel
will be replaced with the position of
the first selected channel. You can
press the Yellow button and enter the
number of the channel you want to
select. Then highlight OK and press OK
to go to that channel. You may need
to set the LCN option to O in order
to enable this feature.
Channel Move: Move a channel to the
position of another channel. Highlight
the channel you want to move and
press OK to select. Then do the same
for a second channel. When the second
channel is selected, you can press the
Blue button and the first selected
channel will be moved to the position
of that channel. When the confirmation
dialogue appears, highlight YES and
press OK to proceed. You can press the
Yellow button and enter the number of
the channel you want to select. Then
highlight OK and press OK to go to
that channel. You may need to set the
LCN option to O in order to enable
this feature.
Channel Edit: Edit channels in the
channel list. Edit the name and channel
number (*) of the selected channel
and display Network Name, Channel
Type, Frequency, Modulation and
Symbol Rate information related
to that channel. Depending on the
Bekijk gratis de handleiding van Vestel 24HA9950Y, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestel |
| Model | 24HA9950Y |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 7400 MB |
