Varytec Retro Blinder OCTO 180 handleiding
Handleiding
Je bekijkt pagina 24 van 44

This operating mode can only be activated when the device is operating in stand-alone mode
or as master in a master / slave combination. This setting is only relevant if the device is not
controlled via DMX.
1. Press [MENU] repeatedly until ‘Mode’ appears on the display.
2. Conrm with [ENTER].
3. Use [UP] and [DOWN] to select the ‘Auto’ menu item.
4. Conrm with [ENTER].
5. Use [UP] and [DOWN] to select the required automatic mode ‘Auto1’ … ‘Auto5’ .
6. Conrm with [ENTER].
ð
The chosen automatic mode is saved.
7. To adjust the running speed for automatic mode, use [UP] and [DOWN] to select the
desired running speed ‘Slow’ or ‘Quick’ .
8. Conrm with [ENTER].
ð
The chosen running speed is saved.
9. To enable automatic mode only for the COB LED, press [MENU] repeatedly until the dis‐
play shows ‘Backlight’ .
10. Conrm with [ENTER].
11. Use [UP] and [DOWN] to select the ‘Auto’ menu item.
12. Conrm with [ENTER].
ð
Automatic mode for the COB LED is activated.
Automatic mode
Operation
24
Retro Blinder OCTO 180
Blinder
Bekijk gratis de handleiding van Varytec Retro Blinder OCTO 180, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Varytec |
Model | Retro Blinder OCTO 180 |
Categorie | Niet gecategoriseerd |
Taal | Nederlands |
Grootte | 2503 MB |