Varytec Retro Blinder OCTO 180 handleiding

Niet gecategoriseerd

Varytec

44 pagina's

PDF beschikbaar

Handleiding

13. To disable automatic mode for the COB LED, use [UP] and [DOWN] to select the ‘Keep’

menu item.

14. Conrm with [ENTER].

Automatic mode for the COB LED is deactivated.

This operating mode can only be activated when the device is operating in stand-alone mode

or as master in a master / slave combination. This setting is only relevant if the device is not

controlled via DMX.

1. Press [MENU] repeatedly until ‘Mode’ appears on the display.

2. Conrm with [ENTER].

3. Use [UP] and [DOWN] to select the ‘Manual’ menu item.

4. Conrm with [ENTER].

5. Use [UP] and [DOWN] to select the desired colour ( ‘Red’ , ‘Green’ , ‘Blue’ or ‘White’ ).

6. Conrm with [ENTER].

7. Use [UP] and [DOWN] to set the required intensity of the selected colour to between

‘000’ and ‘255’ .

8. Conrm with [ENTER].

Manual operation

Operation

Retro Blinder OCTO 180

Blinder

Bekijk gratis de handleiding van Varytec Retro Blinder OCTO 180, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.