VARI-LITE VL800 EVENTPAR handleiding
Handleiding
Je bekijkt pagina 12 van 28
user manual
www.vari-lite.com
VL800 EVENTPAR RGBA
12
CONNECTING DATA AND POWER
A maximum of 32 luminaires may be connected in any one DMX data link.
NOTE: This maximum limit applies to the luminaire “daisy chain” only. Your system or console may require few-
er luminaires on a single data link path. Consult your console documentation for more information.
To connect power and data:
Step 1. Connect data cable from console to first luminaire in chain at DATA IN connector.
Step 2. If required, connect additional data cables from DATA THRU connectors to DATA IN connectors of
remaining luminaires in link.
Step 3. At last luminaire in link, install male termination connector at DATA THRU connector. (Luminaires and
other devices on the same DMX chain may not function properly without termination.)
Step 4. Connect AC Input Cable connector to power input source.
Step 5. Dress AC input and data cables and secure them so that they will not interfere with luminaire head
and yoke movement.
1
5
4
3
2
1
5
4
3
2
common
DMX-
DMX+
not used
not used
DMX output
DMX input
1
5
4
3
2
Bekijk gratis de handleiding van VARI-LITE VL800 EVENTPAR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | VARI-LITE |
| Model | VL800 EVENTPAR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3089 MB |
