Valberg VL-ICM20W handleiding
Handleiding
Je bekijkt pagina 11 van 44
9
EN
2.
Press and hold the button to start cleaning. The four indicator
lights flash alternately, and the pump starts to pump water
around the appliance. The cleaning program takes 5 minutes.
3. To stop the cleaning mode at any time, press the button.
4.
When the cleaning program has finished or it has been stopped,
the unit will enter the standby mode (the selected green ice cube
indicator light flashes). Drain the water from the water tank.
Cleaning the filter cover:
1. Remove the ice basket.
2. Take out the filter cover.
3.
Clean with clean water and a soft brush (such as a toothbrush).
4. Reinsert the filter cover.
Troubleshooting
Problem Possible Cause Solution
The indicator
is lit.
• Low water level or
no water.
• The water inlet
under the filter
cover is blocked or
there is air in the
system.
• Stop ice production. Fill with water.
Press to restart ice production.
• If the unit still does not work, take it
to the nearest service centre.
The indicator
is lit.
• The ice basket is
full. One or both
infrared sensors are
blocked by ice.
• The infrared
sensors are not
working.
• Remove the ice from the ice basket.
• Clean and remove any foreign objects
from the infrared sensors. Restart
the unit.
Cleaning and maintenance
C
Bekijk gratis de handleiding van Valberg VL-ICM20W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Valberg |
| Model | VL-ICM20W |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3011 MB |
