Handleiding
Je bekijkt pagina 74 van 133
Network Settings
70 Embedded Web Server
DNS Search Suffix (Primary, Secondary)
Specifies the primary and secondary DNS (Domain Name System) search suffix.
When DHCP/BOOTP is turned On, you can select DNS Search Suffix (Primary) or
Use following DNS Search Suffix. When DHCP/BOOTP is turned On and Use
following DNS Search Suffix is selected, you can enter static DNS search suffix in
the Primary and Secondary fields provided.
DNS over TLS
DNS over TLS is a protocol developed for DNS name resolution using the Transport
Layer Security (TLS) protocol. Select Auto from the drop-down list to automatically
configure DNS over TLS. Select On to communicate using DNS over TLS. Select
Off to communicate without using DNS over TLS.
Certificate Auto Verification
Select Validity Period, Server Identity, Chain or Revocation as the method to
confirm the validity of certificate obtained from the server. You can use more than
one option at a time.
Revocation Check Type
Select OSCP, CRL, or CRL & OSCP as the method to confirm the revocation of dig-
ital certificate.
Hash
Select a Hash algorithm of either SHA1 or SHA2(256/384). You can use more than
one algorithm at a time.
WINS Servers (Primary, Secondary)
Specifies the IP addresses of the primary and secondary WINS (Windows Internet
Name Service) servers. When DHCP/BOOTP is turned On and Use WINS Server
from DHCP is selected, you can select to use the WINS server obtained via DHCP.
When DHCP/BOOTP is turned On and Use following WINS Server is selected,
you can enter static WINS server information in the Primary and Secondary fields
provided.
3. Click Submit button.
IPv4 settings (Wireless Network)
1. Click TCP/IP under Network Settings on the navigation menu. The Network Settings
: TCP/IP page opens.
2. This section includes the following items for configuration.
DHCP/BOOTP
Specifies whether or not to automatically obtain an IP address using DHCP or
BOOTP.
Auto-IP
When the Auto-IP is set to On, the IP address from 169.254.0.1 through
169.254.255.254 will usually be generated by itself. But if the IP address using
DHCP server or Manual settings has been decided and becomes a candidate as
the result of configuration, the Auto-IP address isn’t generated and decided even
when the Auto-IP is set to On.
Bekijk gratis de handleiding van UTAX 5009ci, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | UTAX |
| Model | 5009ci |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 11339 MB |
