Handleiding
Je bekijkt pagina 75 van 133
Network Settings
User Guide 71
If the IP address has already been entered in IP Address using Manual settings,
delete the address.
To enable the settings, restart network. Automatically-generated IP address
appears on Configuration page under Device Information on navigation menu.
IP Address
If DHCP/BOOTP is set to Off, then a static IPv4 address can be entered in this field
as part of the system network settings. When DHCP/BOOTP is set to On, a
dynamic IPv4 address is assigned to the device, and the field is grayed out. The for-
mat of the IPv4 address is a sequence of numbers separated by dots.
For example: 192.168.110.171
Subnet Mask
Specifies the subnet mask. When DHCP/BOOTP is turned On, a dynamic IPv4
address is assigned to the device, and the field is grayed out.
Domain Name
Specifies the domain name of the domain to which the machine belongs. It should
not contain the host printer name, for example, "abcde.com". abcde.com. When
DHCP/BOOTP is turned On, a dynamic IPv4 address is assigned to the device, and
the field is grayed out.
DNS Server (Primary, Secondary)
Specifies the IP addresses of the primary and secondary DNS (Domain Name Sys-
tem) servers. When DHCP/BOOTP is turned On and Use DNS Server from DHCP
is selected, you can select to use the DNS server obtained via DHCP. When DHCP/
BOOTP is turned On and Use following DNS Server is selected, you can enter
static DNS server information in the Primary and Secondary fields provided.
DNS Search Suffix (Primary, Secondary)
Specifies the primary and secondary DNS (Domain Name System) search suffix.
When DHCP/BOOTP is turned On, you can select DNS Search Suffix (Primary) or
Use following DNS Search Suffix. When DHCP/BOOTP is turned On and Use
following DNS Search Suffix is selected, you can enter static DNS search suffix in
the Primary and Secondary fields provided.
DNS over TLS
Select Auto from the drop-down list to automatically configure DNS over TLS.
Select On to communicate using DNS over TLS. Select Off to communicate without
using DNS over TLS.
Certificate Auto Verification
Select Validity Period, Server Identity, Chain or
Revocation as th
e meth
od to
confirm the validity of certificate obtained from the server. You can use more than
one option at a time.
Revocation Check Type
Select OSCP, CRL, or CRL & OSCP as the method to confirm the revocation of dig-
ital certificate.
Bekijk gratis de handleiding van UTAX 5009ci, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | UTAX |
| Model | 5009ci |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 11339 MB |
