Handleiding
Je bekijkt pagina 73 van 133
Network Settings
User Guide 69
Do Not Use Proxy for Following Domains
Enter the domain address which do not use the proxy. Use a comma (,) between
multiple addresses. Do not use a a semicolon (;) and asterisk (*).
3. Click Submit button.
IPv4 settings (Wired Network)
1. Click TCP/IP under Network Settings on the navigation menu. The Network Settings
: TCP/IP page opens.
2. This section includes the following items for configuration.
DHCP/BOOTP
Specifies whether or not to automatically obtain an IP address using DHCP or
BOOTP.
Auto-IP
When the Auto-IP is set to On, the IP address from 169.254.0.1 through
169.254.255.254 will usually be generated by itself. But if the IP address using
DHCP server or Manual settings has been decided and becomes a candidate as
the result of configuration, the Auto-IP address isn’t generated and decided even
when the Auto-IP is set to On.
If the IP address has already been entered in IP Address using Manual settings,
delete the address.
To enable the settings, restart network. Automatically-generated IP address
appears on Configuration page under Device Information on navigation menu.
IP Address
If DHCP/BOOTP is set to Off, then a static IPv4 address can be entered in this field
as part of the system network settings. When DHCP/BOOTP is set to On, a
dynamic IPv4 address is assigned to the device, and the field is grayed out. The for-
mat of the IPv4 address is a sequence of numbers separated by dots.
For example: 192.168.110.171
Subnet Mask
Specifies the subnet mask. When DHCP/BOOTP is turned On, a dynamic IPv4
address is assigned to the device, and the field is grayed out.
Domain Name
Specifies the domain name of the domain to which the machine belongs. It should
not contain the host printer name, for example, "abcde.com". abcde.com. When
DHCP/BOOTP is turned On, a dynamic IPv4 address is assigned to the device, and
the field is grayed out.
DNS Server (Primary, Secondary)
Specifies the IP addresses of the primary and secondary DNS (Domain Name Sys-
tem) servers. When DHCP/BOOTP is turned On and Use DNS Server from DHCP
is selected, you can select to use the DNS server obtained via DHCP. When DHCP/
BOOTP is turned On and Use following DNS Server is selected, you can enter
static DNS server information in the Primary and Secondary fields provided.
Bekijk gratis de handleiding van UTAX 5009ci, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | UTAX |
| Model | 5009ci |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 11339 MB |
