Ultimate Speed UPK 10 G4 handleiding
Handleiding
Je bekijkt pagina 16 van 85
16
GB/IE/NI
PLEASE NOTE: The digital pressure gauge with air pressure and battery display
6
of the power
bank with compressor
1
is not trade-approved. Therefore, if inflatable items have been pumped
up, in which incorrect pressure can be dangerous (e.g. tyres), find a specialist unit with a
trade-approved device and check the pressure of the inflatable item.
Tips for use
The device is not intended for continuous operation. The device was designed to create air pressure –
not an air flow. Please do not use the device for more than 7 minutes at a time on items with a large
volume, to avoid overheating and damage to the device. Then let the device cool down for at least 15 minutes.
We recommend first filling a large-volume item with air, in order to then generate the required pressure
with the device. Do not use the device for more than 7 minutes at a time without stopping. Then let the
device cool down for at least 15 minutes.
Air pressure testing with the power bank with compressor
PLEASE NOTE: The digital pressure gauge with air pressure and battery display
6
of the power
bank with compressor
1
is not trade-approved.
Switch on the power bank with compressor
1
by using the switch for the power bank
9
.
Connect the inflatable item to the compressed air hose
17
of the power bank with compressor
1
,
whose pressure you want to check. To do so, please proceed as described in the section “Connecting
the compressed air hose with a valve adapter” or “Connecting the compressed air hose without a
valve adapter”.
Use the “M” menu button
5
to select the desired unit of pressure. The units available are bar
(“bar”), kilopascal (“KPa”), kilogram per square centimetre (“KG/CM²“) and pound per square inch
(“PSI”) (see Fig. E).
The digital pressure gauge with air pressure and battery display
6
shows the pressure of the
connected inflatable item in the preset unit.
Disconnect the inflatable item from the compressed air hose
17
of the power bank with compressor
1
. To do so, please proceed as described in the section “Removing the compressed air hose”.
PLEASE NOTE: When disconnecting the compressed air hose
17
, air can escape from the valve
of the inflatable item. Ensure that you remove the compressed air hose
17
as quickly as possible.
Safety fuse
If the device becomes overloaded or malfunctions, the safety fuse triggers to protect the device.
Never use a fuse with a higher release current strength. There is a risk of fire!
Attention: To protect people and property, an overheat protection circuit has been installed
for the rechargeable battery pack in the power bank with compressor
1
. This prevents an
overheating of the rechargeable battery pack installed in the device and automatically switches off the
power bank with compressor
1
if the battery temperature is too high. If this happens, allow the device
to cool down prior to re-commissioning it.
z Switching the lighting on
Lighting mode
To switch the LED light
7
on, press the power switch
7a
for the LED light.
Press the power switch for the LED light
7a
three times to switch the LED light
7
off again.
Bekijk gratis de handleiding van Ultimate Speed UPK 10 G4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ultimate Speed |
| Model | UPK 10 G4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7847 MB |
