TVS X handleiding
Handleiding
Je bekijkt pagina 23 van 65
TVS X User Manual - Rev 0 - As on 23 Dec 2024
21
6. Switch beam control / pass-by
Headlamp ‘high / low’ beam glows
automatically depending on the switch
position when the power is turned ‘ON’.
On selecting the ‘high / low’ beam
switch position, headlamp will operate
in corresponding beam.
- Press the switch towards ‘ ’ to
illuminate low beam.
- Open the switch towards ‘ ’ to
illuminate high beam.
- When the headlamp is illuminated in
high beam, the high beam indicator
of the instrument clusterr ‘ ’
glows along with it.
Press the switch intermittently towards
you to flash the headlamp (pass-by).
- Flashing the headlamp high beam
provides signal to the vehicles
coming from opposite direction
during overtakes.
- If the high beam is flashed, the high
beam indicator also flashes along
with it.
Note
Use appropriate headlamp beam
‘high / low’ as per the trafc and road
conditions for your safety and avoid
inconvenience to other riders.
BRAKE LEVER LH
1. Rear brake lever
The left hand side brake lever controls
a hydraulic circuit. While squeezing the
lever, hydraulic circuit operates the rear
brake system. The brake lamp glows on
application of rear brake.
6
2
1
2. LH brake lever position adjuster
TVS X comes with adjustable brake
levers. There are three positions
provided for you to adjust the lever to
suit your palm size.
To adjust the lever position, rotate the
position adjuster to any of the three
position by aligning the ‘arrow mark (A)’
on the lever to the number provided on
the adjuster.
Bekijk gratis de handleiding van TVS X, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | TVS |
| Model | X |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10238 MB |