TVS X handleiding
Handleiding
Je bekijkt pagina 22 van 65
TVS X User Manual - Rev 0 - As on 23 Dec 2024
20
While the cruise control is turned ‘ON’
(cruise state), you can increase already
set cruise speed in the following
manner:
- Gently push the Cruise control
switch knob towards ‘Res/+’
position to increase the cruise
speed by 1km/h.
Conditions to turn ‘ON’ cruise control:
Cruise control can be switched ‘ON’
only when the following speed limit
conditions are met:
Minimum speed Maximum speed
15 kmph 80 kmph
To turn ‘ON’ the cruise control
Press the cruise control switch when
the vehicle speed is more than the
minimum allowable speed limit. This
will turn ‘ON’ cruise control and set
speed setting at the current riding
speed will happen simultaneously.
Conditions for cruise control suspend
/ cancel
According to the accelerator grip position
of the vehicle, override operation will
be detected by the system and cruise
control will be suspended.
If the accelerator grip position is
overclosed to the negative direction
(accelerator blip function), cruise control
will be cancelled.
According to the brake lever or pedal
operation by the rider, the braking
intention is detected and cruise control
will be cancelled.
The cruise control will not be allowed to
activate till the brake input is present.
Cruise control will be cancelled if the kill
switch is activated.
Do’s and Dont’s while cruise mode is
engaged
Avoid keeping hand on the brake levers
while riding. Any input from the brake
levers will opt out the vehicle from
cruise mode.
Note
Cruise control will not work when there
is an active error in the vehicle.
Any input for ride mode change will exit
cruise control.
Bekijk gratis de handleiding van TVS X, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | TVS |
| Model | X |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10238 MB |