Handleiding
Je bekijkt pagina 13 van 27
EN 13
local air conditioner PAC 2020 E / PAC 2620 E
Dehumidification
In Dehumidification mode the humidity level in the room is
reduced.
The target temperature is preset to a fixed value of 22°C and
cannot be changed manually. The ventilation runs at minimum
speed.
Info
Remove the exhaust air hose during Dehumidification,
otherwise the performance will be insufficient.
1. Press the Mode button(19) until the Dehumidification
LED(25) is illuminated.
ð Dehumidification mode is selected.
Info
If the device is operated in a very humid environment,
the accumulating condensate must be discharged at
regular intervals (see Condensate discharge).
Connecting the condensation drain hose
If you use the device for an extended period of time or you don't
want to empty the condensation tank regularly, you can connect
a condensation drain hose to the hose connection.
ü The device is switched off.
1. Check whether there is a drain at the installation site or
provide a suitable collection container under the
condensate outlet.
2. Pull the rubber stopper out of the hose connection.
3. Keep the rubber stopper for later use.
4. Connect a suitable hose (Ø16mm) to the hose connector.
5. Guide the other hose end to a suitable drain or sufficiently
dimensioned collection container. To ensure that the
condensate can run off, the condensation drain hose must
not be kinked, nor should it have to overcome an uphill
incline towards the drain.
Bekijk gratis de handleiding van Trotec PAC 2620 E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Trotec |
| Model | PAC 2620 E |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 3095 MB |
