Tornado VCRMCWC handleiding
Handleiding
Je bekijkt pagina 19 van 115
English 19
Indicator light Voice prompt Solution
Robot -
Flashing Red
Error 16: Relocalized failed, stop
cleaning.
- Please put the robot back to the charging base and
restart it.
Error 17: Relocalized failed, stop
recharging.
- Please manually place the robot back to the charging
base for charging.
Error 18: The specified area cannot
be reached.
- Please move the robot to a new location to start or
remove the settings that robot cannot be crossed to
the restricted area.
Error 19: Laser distance sensor
stuck. Please clean and retry.
- The laser distance sensor may be entangled with
trapped dirt. Please clean and retry.
Error 20: Laser distance sensor
blocked. Please clear it.
- The laser distance sensor maybe blocked by
obstacles or dust. Please clean the area around and
wipe it with a dry cloth.
Error 21: No-go zone detected,
move to new location to start.
- Please move the robot outside the no-go zone and
restart it.
Error F1: Side brush module fault.
Please check and try restarting the
system.
Please check whether side brush is entangled with
dirt. Please remove, clean and reinstall the side brush,
and then try to turn off and then turn on the system.
If the fault persists, please contact our customer
service.
Error F2: Roller brush module fault.
Please check and try restarting the
system.
Please check whether the roller brush is entangled
with dirt. Please remove, clean and reinstall the roller
brush then try to turn off and then turn on the system.
If the fault persists, please contact our customer
service.
Error F3: Vacuum fan module fault.
Please check and try restarting the
system.
Please check whether the dust box, filter or dust
suction port is blocked by dirt. Please clear them, and
then try to turn off and then turn on the system.
If the fault persists, please contact our customer
service.
Error F4: Wheel module fault.
Please check and try to restart the
system.
Please check whether the wheel is entangled with dirt.
Please clean it, and then try to turn off and then turn
on the system.
If the fault persists, please contact our customer
service.
Error F6: Battery module fault.
Please wait until the battery
temperature is normal before using.
The battery temperature is too high or too low. Please
wait for the battery temperature to be normal before
use.
If the fault persists, please contact our customer
service.
Bekijk gratis de handleiding van Tornado VCRMCWC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tornado |
| Model | VCRMCWC |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 17004 MB |
