Tornado VCRMCWC handleiding
Handleiding
Je bekijkt pagina 17 van 115
English 17
9)
Replace dust bag of auto-empty charging base, and clean auto -empty dirt port and filter
When the dust bag is full, replace the dust bag according to the indicator light of the auto-empty charging base.
It is recommended to check and replace the dust bag regularly.
Open the top cover of the auto -empty charging base.
Pull up the handle of dust bag to take out the dust bag.
Note :
-
When taking out the dust bag, the clip of dust bag handle will automatically close the dust bag to effectively
prevent dust leakage.
Discard used dust bags.
Wipe the filter inside the bucket and the auto -empty dirt port outside with a soft dry cloth.
Install a new dust bag. push the clip along the guide rail.
Close the top cover of charging base.
10)
Clean the air duct
If the air duct is blocked, clean it according to the following steps.
Put a soft cloth on a flat surface, and then lay the auto-empty charging base back and flat with the front side facing up.
Note :
- Do not place the auto-empty charging base upside down to avoid damaging the top decorative ring and dust bag cover.
Unscrew the air duct cover screws with a screwdriver and take out the air duct cover.
Check whether the air duct is blocked by dirt and clean it.
Reinstall the air duct cover b
ack with a screwdriver.
11)
Clean the hose assembly
Clean residual dust or hair inside the hose.
Air dry the hose assembly for future use.
12)
Clean the nozzle
Clean residual dust or hair inside the nozzle.
Air dry the nozzle for future use.
Bekijk gratis de handleiding van Tornado VCRMCWC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tornado |
| Model | VCRMCWC |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 17004 MB |
