Tornado VCRMCWC handleiding
Handleiding
Je bekijkt pagina 16 van 115
English 16
4
5
4)
Clean roller brush and roller brush cover
Press and hold the roller brush cover buckle on both sides inward, and take out the roller brush cover and the roller brush.
2
Cut off the hair entangled on the roller brush with the blade of the cleaning brush.
3
The roller brush bearing on the side of the roller brush can be removed to clear any hair wound in the gap.
4
Clean the dirt on the roller brush cover.
I
nstall the roller brush and roller brush cover back on.
5)
Clean the side brush
Pull out the side brush.
Clean the side brush with a cleaning brush and install it back.
6)
Clean caster wheel
Pry out the caster axle and pull out the caster body with a
small screwdriver and other tools
Clean the hair and dirt from the caster axle and caster body,
and then reinstall and press it tightly.
Caster boby
Caster axle
7)
Clean wheels
Wipe and clean the wheels with a soft dry cloth.
8)
Clean sensors, charging contact pins and charging contacts
Wipe and clean with a soft dry cloth.
Note :
-
There are sensitive electronic components inside the product, so please wipe them with a soft dry cloth when cleaning.
Do not use wet rags to prevent water damage.
1 3
2
Bekijk gratis de handleiding van Tornado VCRMCWC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tornado |
| Model | VCRMCWC |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 17004 MB |
