Toolson WS4100 handleiding

Niet gecategoriseerd

Toolson

248 pagina's

PDF beschikbaar

Handleiding

/ 248

Je bekijkt pagina 21 van 248

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58  www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

21GB

■ After you have switched off the motor, never slow

down the saw blade by applying pressure to its

side.

■ Only t blades which are well sharpened and have

no cracks or deformations.

■ Do not use circular saw blades made of highalloy

high-speed steel (HSS).

■ Use only blades which are recommended by the

manufacturer and comply with EN 847-1.

■ Faulty saw blades must be replaced immediately.

■ Never use saw blades which do not comply with the

data specied in this manual.

■ Never dismantle the machine’s safety devices or

render them inoperative.

■ If the table insert is worn, replace it.

■ Always stand to the side of the saw blade when

working with the saw.

■ Never load the machine so much that it cuts out.

■ Make sure that off-cuts do not catch on the saw

blade crown. Risk of catapulting!

■ Never remove loose splinters, chips or jammed

pieces of wood when the saw blade is running.

■ To rectify faults or remove jammed pieces

of wood, always switch off the machine rst.

- Pull the power plug! -

■ If the sawing gap is worn, replace the table insert.

- Pull the power plug! -

■ Carry out retooling work, adjustments, measure-

ments and cleaning jobs only when the motor is

switched off. - Pull the power plug! -

■ Before switching on, make sure that all keys and

wrenches have been removed from the tool.

■ Switch off the motor and pull the power plug before

you leave the workplace.

■ Ret all guards and safety devices immediately af-

ter you have completed any repairs or maintenance

work.

■ Be sure to observe the safety information and op-

erating and maintenance instructions issued by the

manufacturer, as well as the dimensions listed in

the Technical Data.

■ It is imperative to observe the accident prevention

regulations in force in your area as well as all other

generally recognized rules of safety.

■ Do not use the cable for purposes for which it is not

designed.

■ Make sure you stand squarely and keep your bal-

ance at all times.

■ Check the tool for damage.

■ Each time before re-using the tool, carefully check

that the guards or any slightly damaged parts are

working as intended.

■ Check that the moving parts are in good working

order, that they do not jam, and that no parts are

damaged. Make sure that all parts are tted cor-

rectly and that all other operating conditions are

properly fullled.

■ Unless otherwise stated in the operating instruc-

tions, damaged safety devices and parts must

be repaired or replaced by an authorized service

center.

■ Have damaged switches replaced by a customer

service workshop.

■ This electric tool complies with the pertinent safety

regulations. Repairs are to be carried out only by

a qualied electrician using original replacement

parts or the user may suffer an accident.

■ If necessary, wear suitable personal protection

equipment. This could consist of:

- Ear plugs to prevent the risk of damaging your

hearing;

- A breathing mask to avoid the risk of inhaling

hazardous dust.

- Always wear gloves when handling saw blades

and rough materials. Whenever practicable, saw

blades must be carried in a container.

■ The operator must be informed about the condi-

tions that inuence the generation of noise (for ex-

ample saw blades designed to reduce noise emis-

sions, caring for blades and the machine).

■ Faults on the machine or its guards, safety devices

and blade must be reported to the person in charge

as soon as they are discovered.

■ Use only the transport devices to move the ma-

chine. Never use the guards for handling and mov-

ing the machine.

■ All operators must receive proper training in the

use, adjustment and operation of the machine.

■ Do not saw any materials that contain foreign bod-

ies such as wires, cables or ties.

■ Only use sharp saw blades.

■ Only use the machine in well-ventilated areas.

■ The exposure to dust depends on what type of ma-

terial is processed

■ If available, switch on an external extractor system

prior to starting with the work.

■ Make sure that all the spindle rings and saw ang-

es used are suitable for the intended purpose, as

specied by the manufacturer.

■ The workpieces you want to work on should be

stacked near the normal operating position.

■ Follow the instructions concerning regular cleaning

and the removal of chips and dust in order to re-

duce the risk of re.

■ Throughout the machine‘s anticipated service life,

make sure that the machine and its components

cannot topple, fall over or move out of control dur-

ing transport, assembly, disassembly, disabling

and scrapping

■ This appliance is not intended for use by persons

(including children) with reduced physical, sensory

or mental capabilities, or lack of experience and

knowledge, unless they have been given supervi-

sion or instruction concerning use of the appliance

by a person responsible for their safety. Children

should be supervised to ensure that they do not

play with the appliance.

Residual risks

Even if you use this electric power tool in ac-

cordance with instructions, certain residual

risks cannot be rules out. The following hazards

may arise in connection with the equipment’s

construction and layout:

1. Lung damage if no suitable protective dust mask

is used.

2. Damage to hearing if no suitable ear protection is

used.

/ 248

Bekijk gratis de handleiding van Toolson WS4100, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.