Toolson WS4100 handleiding
Handleiding
Je bekijkt pagina 20 van 248
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
20 GB
ATTENTION
The device and packaging materials are not
toys! Children must not be allowed to play with
plastic bags, lm and small parts! There is a
risk of swallowing and suffocation!
4. Intended use
The rewood drag saw is designed for cross-cutting
rewood within the specied dimensions (see techni-
cal data) in a feed cradle that pivots towards the
saw blade. This tool is only designed for outdoors
use and for operation by one person. Other persons
must remain a safe distance away from the tool
whilst it is operating.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user/operator and not the manufacturer
will be held liable for damage and/or injuries of any
kind that result from such misuse. The machine is
to be operated only with suitable saw blades (saw
blades made of HM or CV) It is prohibited to use any
type of HSS saw blade and cutting-off wheel. To
use the machine properly you must also observe the
safety regulations, the assembly instructions and the
operating instructions to be found in this manual.
All persons who use and service the machine have
to be acquainted with this manual and must be
informed about the machine’s potential hazards. It is
also imperative to observe the accident prevention
regulations in force in your area. The same applies
for the general rules of occupational health and
safety.
The manufacturer shall not be liable for any changes
made to the machine nor for any damage resulting
from such changes.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial ap-
plications. Our warranty will be voided if the machine
is used in commercial, trade or industrial businesses
or for equivalent purposes.
5. Safety information
■ m WARNING!: When using electric tools it is im-
perative to take the following basic safety precau-
tions in order to reduce the risk of electric shock,
injury and re.
■ Take due note of all this information before and
while working with the saw.
■ Do not lose these safety regulations.
■ Guard against electric shock Avoid body contact
with earthed parts.
■ When equipment is not being used it should be kept
in a dry, closed place out of children’s reach.
■ Keep mounted attachments sharp and clean to en-
able you to work well and safely.
■ Check the power cable regularly and have it re-
placed by an authorized specialist at the rst sign
of any damage.
■ Check your extension cables regularly and replace
them if damaged.
■ When working outdoors, use only extension cables
that are approved for outdoor use and which are
marked accordingly.
■ Concentrate on what you are doing. Use common
sense when working. Do not operate the tool if your
mind is not on your work.
■ Never use an electric tool with a switch that cannot
be turned on and off.
■ m WARNING!: The use of other tools and acces-
sories may put you at risk of injury.
■ Always pull the plug out of the power socket before
adjusting or servicing the machine.
■ Give these safety regulations to all persons who
work on the machine.
■ Caution! Hands and ngers may be injured on the
rotating saw blade.
■ The machine's On/Off switch is equipped with a
safety switch to prevent the machine from starting
up again after a voltage drop or power failure. After
a voltage drop or power failure, the machine will
not start again until after the On switch has been
pressed.
■ Before you use the machine for the rst time, check
that the voltage marked on the rating plate is the
same as your mains voltage.
■ If you need to use an extension cable, make sure
its conductor cross-section is big enough for the
saw’s power consumption. Minimum crosssection
1.5 mm
2
or 2.5 mm
2
for cable lengths of 20 m or
more.
■ If you use a cable reel, the complete cable must be
pulled off the reel.
■ Check the power cable. Never use a faulty or dam-
aged power cable.
■ Do not use the cable to pull the plug out of the
socket. Protect the cable from heat, oil and sharp
edges.
■ Do not leave the saw in the rain and never use it in
damp or wet conditions.
■ Provide good lighting.
■ Do not saw near ammable liquids or gases.
■ Wear suitable work clothes! Loose garments or
jewelry may become caught up in the rotating saw-
blade.
■ Non-slip shoes are recommended when working-
outdoors.
■ Wear a hair net if you have long hair.
■ Avoid abnormal working postures.
■ Operators must be at least 16 years of age.
■ Keep children away from the machine when it is
connected to the power supply.
■ Keep your workplace clean of wood scrap and any
unnecessary objects.
■ An untidy work area invites accidents.
■ Do not allow other persons, especially children, to
touch the tool or cable. Keep them out of your work
area.
■ Persons working on the machine should not be dis-
tracted.
■ Note the direction of rotation of the motor and saw
blade. Use only blades whose permissible maxi-
mum speed is not lower than the maximum spindle
speed of the circular saw and of the material to be
cut.
Bekijk gratis de handleiding van Toolson WS4100, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Toolson |
| Model | WS4100 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 42481 MB |
