Toa TT-104B handleiding
Handleiding
Je bekijkt pagina 10 van 16
10
6.4. Program Check, Correction and Cancellation
After finishing program registrations, check the program contents.
Step 1. Set the Program switch to PROGRAM.
The Channel indicators (A, B, C, and D) and Pause mode indicator flash.
Step 2. Press the A channel key to select the A channel.
The A channel indicator comes on, while both the Day mode and Time mode indicators flash.
Step 3. Press the DAY mode key to put the timer in the day mode.
The Day mode indicator comes on. At the same time, the Day indicators from Monday to Sunday
flash.
Step 4. Press the CHECK key to check the registered day of the week.
The indicator of the registered day of the week comes on.
[Correcting the day of the week]
After pressing the desired Day setting key, press the STORE key.
[Cancelling the day of the week]
Press the CANCEL key.
The word “PASS” is indicated in the display and all Day indicators from Monday to Sunday go out,
achieving the cancellation.
Step 5. Press the TIME mode key to put the timer in the time mode.
The Time mode indicator comes on. At the same time, a dotted line “– – – –“ flashes in the clock
display.
Step 6. Press the CHECK key to check the registered time.
Each time the CHECK key is pressed, the registered time is shown in the clock display starting first
with the earliest time to the latest in sequence.
Pressing the CHECK key when the last time is indicated causes the word “End” to appear in the clock
display, returning the indication to the first time.
[Correcting the time]
(1) Press the CHECK key till that time appears in the display.
(2) Press the CANCEL key for cancelling the indicated time and then set the new time using the
Clock setting keys (HOUR and MIN).
(3) Register the new time with the STORE key.
Note: Be sure to cancel the previous time when correcting it.
[Cancelling the registered time]
(1) Press the CHECK key to get that time in the clock display.
(2) Press the CANCEL key. The word “PASS” appears in the display and that time has been
cancelled.
In this event, that cancelled time remains indicated in the display.
Further cancellations can be achieved in a similar manner by using both the CHECK and
CANCEL keys.
Note: Pressing the CHECK key when no time is registered results in “End” being indicated in the
display, with “Err” indicated when the CANCEL key is pressed.
Bekijk gratis de handleiding van Toa TT-104B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Toa |
| Model | TT-104B |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1355 MB |
