Toa TT-104B handleiding
Handleiding
Je bekijkt pagina 11 van 16
11
6.5. Entire Program Cancellation
It is impossible to simultaneously cancel all the programs registered into all channels.
Cancellation is only possible for each channel (A, B, C and D).
Follow the procedures below to cancel the A channel time program.
Step 1. Set the Program switch to PROGRAM.
The Channel indicators (A, B, C, and D) and Pause mode indicator flash.
Step 2. Press the A channel key to select the A channel.
The A channel indicator comes on, while both the Day mode and Time mode indicators flash.
Step 3. Press the TIME mode key to put the timer in the time mode.
The Time mode indicator comes on. At the same time, a dotted line “– – – –“ flashes in the clock
display.
Step 4. Press the CANCEL key with the A channel key continuously pressed.
The word “PASS” appears in the display, indicating that the whole time program registered into the A
channel has been cancelled.
Similarly, the whole time program registered into each of the B, C and D channel can be cancelled.
For the day of the week, perform individual cancellations as instructed in the section 6.4. "Program Check,
Correction and Cancellation."
6.6. Program Operation
Be sure to set the Program switch to OPERATION after programming is finished.
The timer does not work if the switch is set to PROGRAM.
6.7. Pause Mode
• The PAUSE mode key is used to temporarily make the timer not to function on particular days. This is
possible for up to the 7th day from the day of registration.
• No output is delivered from the timer on a day set for pause.
• After the pause day is over, the timer automatically returns to the normal state.
Use the pause function in such a case as the following example.
[Example]
Today is Friday and we want to stop the timer operation on Monday through Wednesday of next week since
our office is closed on these three days due to holidays.
Note: When it is on Monday that Monday is registered for pause mode, the pause day is a Monday of the
following week. Follow the procedures below to make Monday through Wednesday the pause days as
in the example.
Step 1. Set the Program switch to PROGRAM.
The Channel indicators (A, B, C and D) and Pause mode indicator flash.
Step 2. Press the PAUSE mode key.
The Pause mode indicator comes on, while the Day indicators from Monday to Sunday flash.
OPERATION
PROGRAM
Bekijk gratis de handleiding van Toa TT-104B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Toa |
| Model | TT-104B |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1355 MB |
