Toa RM-300MF handleiding

150 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 37 van 150
37
Step 3. Makeannouncementwhilepressingtheemergencymicrophone’sTalkkey.
Whenanemergencyattentiontone*hasbeenenabled,pressingthePress-
to-talk switch immediately sounds a ding-dong.
* This function can be used only when both versions of VM-3000VA firmware
and VM-3000 Setting Software are 3.00 or later.
During emergency microphone announcements, the Emergency Microphone
Operation indicator and Output indicator both light red. At the same time, the
"EMERGENCYVAMICROPHONE"indicationisdisplayedontheLCD.
Talk key
Step 4. Toterminatetheemergencybroadcast,resettheemergencymodeusingoneofthefollowingmethods:
Press the Reset key on the front panel of
the VM-3360VA or VM-3240VA.
• PresstheRM-300MFFireman’sMicrophone
Emergency Reset key.
Note
The Emergency Reset indicator (red) remains
lit while the Emergency Reset key is pressed.
Input a reset signal to the Emergency
Control Input terminals of the VM-3240VA,
VM-3360VA, VM-3240E, or VM-3360E
which has been assigned a reset function.
Note
Use the setting software to assign the reset
function to the Emergency Control Input
terminal. (Refer to "Emergency Control
Input Settings" in "Event Settings" in the
separate software instruction manual.)
Reset key
[VM-3240VA/3360VA]
MIC SP CPU
OFF ON
Emergency Reset
key
Emergency Reset
indicator
[RM-300MF]
[VM-3240VA/3360VA/3240E/3360E]
Emergency Control Input terminals
Note:
This figure represents the VM-3240VA/3360VA.
E
M
E R
G
E N C Y
V A
M
I C R
O
P H
O
N E

Bekijk gratis de handleiding van Toa RM-300MF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkToa
ModelRM-300MF
CategorieNiet gecategoriseerd
TaalNederlands
Grootte19502 MB

Caratteristiche Prodotto

Gewicht1100 g
Breedte200 mm
Diepte82.5 mm
Hoogte215 mm
Kleur behuizingWit