Handleiding
Je bekijkt pagina 3 van 4
3
6. INSTALLATION
Step 1. Mount the wall bracket on the wall.
Notes
• Bolts and nuts used for mounting the wall bracket to the wall are not supplied.
• Use M6 bolts and nuts.
• Be sure to mount the wall bracket to the wall using 6 bolts as shown in the
gureatright.
Step 2. Secure the speaker bracket to the speaker.
2-1. Remove all screws from the left side of the speaker.
Tip
The removed screws are not used.
Left side
Remove
2-1
2-2
Hexagon bolt M6 x 25
(with plain washer and spring washer, accessory)
Speaker bracket
2-2. Secure the speaker bracket to the left side of the speaker using the supplied screws.
Recommended tightening torque: 7 N·m
Step 3. Attachthesafetywiretotheleftsideofthespeakerasshowninthegurebelow.(2places)
• Install the safety wire on a wall side to the location that is
strong enough to withstand the entire weight of the speaker
including the mounting brackets.
• Use safety wire that is strong enough to suspend the full
weight of the components to be installed.
• Keep the safety wire at the minimum length without slack.
WARNING
Note
The safety wire and its attachment
hardware such as eyebolts, bolts
and nuts are not supplied. Prepare
them separately.
Tip
The removed screw is not used.
Install a plain washer and an eyebolt
to the 2 screw holes at shown in the
gure,thenattachthesafetywireto
the each eyebolt.
Wall
Wall bracket
Eyebolt
Safety wire
Plain washer
(For M6)
Install the safety wire
to these 2 holes.
Bekijk gratis de handleiding van Toa HY-WM-FB08B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Toa |
| Model | HY-WM-FB08B |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 522 MB |
