Theben RMG 8 T KNX handleiding
Handleiding
Je bekijkt pagina 57 van 87
MIX 2 series RMG 8 T / RME 8 T actuators
5.3.6.4 The "Block function" parameter page
This page can be activated on the Configuration options parameter page.
Table 26
Designation
Values
Description
Lock telegram
Lock with ON telegram
0 = Enable
1 = Lock
Lock with OFF telegram
0 = Lock
1 = Enable
Note: The lock is always deactivated
after reset.
Response when setting
the lock
Preset 1
Preset 2
Preset 3
Preset 4
Preset 5
Preset 6
Preset 7
Preset 8
Approach a preset position.
See Presets parameter page.
Top end position
Lower end position
Approach an end position.
unchanged (stopped upon
operating command)
Do not react. The drive should stop
when a lock command is received
during a movement.
Response when
cancelling the lock
Preset 1
Preset 2
Preset 3
Preset 4
Preset 5
Preset 6
Preset 7
Preset 8
Approach a preset position.
See Presets parameter page.
Top end position
Lower end position
Approach an end position.
unchanged (stopped upon
operating command)
Do not react. The drive should stop
when a lock command is received
during a movement.
Update (height/slat)
Approach last received position.
Version: May-14 (Subject to change) Page 57 of 87
Bekijk gratis de handleiding van Theben RMG 8 T KNX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Theben |
| Model | RMG 8 T KNX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11185 MB |
