Thames & Kosmos Robotics Smart Machines: Super Sphere handleiding

Niet gecategoriseerd

Thames & Kosmos

64 pagina's

PDF beschikbaar

Handleiding

DOWNLOAD AND INSTALL THE APP

You can download the free Super Sphere app for iOS

devices from the iOS App Store, or for Android devices

from Google Play. The app, also referred to as the control

app, allows you to remotely control and program your

robots.

For speciﬁc device requirements, see the Information

section in the Super Sphere app’s download page.

To get the app:

1. Turn on your tablet or smartphone.

2. Scan the QR code to the right to take you to the product

page for this kit (or search for the “Super Sphere

Robotics app”).

3. On the product page, scroll down until you see the

images of the app icons and the links to the app pages in

the app stores. Follow the links for the correct app store

based on your device.

4. Follow the steps on the app download page to

download and install the app on your device.

5. Open the app and the interface for remote control mode

(A) will appear.

ESTABLISHING A CONNECTION

1. Connect the app to your robot’s Bluetooth baery box

by pressing the Bluetooth buon (B) in the upper left

corner of the app screen.

2. When the connection has been made, the Bluetooth

symbol will change color, the blue light on the baery

box will change from blinking to solid, and, if a motor is

connected, the motor will drive for a brief moment to

indicate the connection has been made. See the chart to

the right for descriptions of each connection state.

Scan this QR code to go

to the product page,

where there are links to

download the app from

the app stores.

APP SETUP

Super Sphere

Blue light on

baery box:

Blinking

Bluetooth icon in app:

Gray with blinking ring

Bluetooth not connected

Blue light on

baery box:

Blinking

Bluetooth icon in app:

Blinking yellow

App searching for Bluetooth connection

Blue light on

baery box:

On and not

blinking

Bluetooth icon in app:

Solid yellow with blue circle

Bluetooth connected

Blue light on

baery box:

Oﬀ

• No Bluetooth connection

• Power-saving mode

• Automatically sleeps after

about a minute of inactivity

• Jiggle it to wake it up

Bluetooth baery box sleeping

TROUBLESHOOTING THE CONNECTION

If the Bluetooth connection isn’t working:

››› Make sure the baeries are fully charged and the

Bluetooth baery box is awake (the blue light is blinking).

››› Make sure Bluetooth is enabled on your device and

location services are enabled for the Super Sphere app.

››› Try restarting the app or the device.

››› If the blue light on the baery box is solid but there is no

Bluetooth connection, quit the app and wait for the blue

light to start blinking again. Then restart the app.

››› Try removing and reinserting the baeries to reset the

baery box.

Getting Started

Bekijk gratis de handleiding van Thames & Kosmos Robotics Smart Machines: Super Sphere, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.