Thames & Kosmos Robotics Smart Machines: Super Sphere handleiding

Niet gecategoriseerd

Thames & Kosmos

64 pagina's

PDF beschikbaar

Handleiding

REMOTE CONTROL MODE

USING REMOTE CONTROL MODE

After you have built a robot model (assembly instructions

start on page 14) and connected it to the app (see previous

page), you can control it with the interface controls in the

remote control mode.

You can use the two slider controls (C) to directly control

the two motors on your models. Slide the left-hand slider

up or down with your ﬁnger to make motor A spin

clockwise or counterclockwise. Likewise, the right-hand

slider controls motor B. The direction in which the motors

spin depends on the orientation of the motor wire into the

Bluetooth baery box (see below).

In the default setup for the remote control mode, the left-

hand slider is vertical and the right-hand slider is

horizontal. This is because for the Super Sphere, the left-

hand slider controls the forward and backward motion,

and the right-hand slider controls the left and right

motion. However, if you tap the slider orientation buon

(D), the right-hand slider toggles between a horizontal

and a vertical orientation. You can decide which slider

orientation is easiest for you depending on the speciﬁc

model you are controlling.

See page 22 for speciﬁc remote control driving

instructions for the Super Sphere model.

motor Bmotor Amotor Bmotor A

motor Amotor B

Tip-5-B

motor Amotor B

Tip-5-D

motor Amotor B

When you slide the sliders like this ...

... the motors turn in these directions depending on the orientation of each motor’s plug in the socket on the baery box.

Rounded sides of both plugs

facing forward

Flat sides of both plugs

facing forward

Rounded side of the motor B

plug and ﬂat side of the

motor A plug facing

forward

Flat side of the motor B plug

and rounded side of the

motor A plug facing

forward

Bekijk gratis de handleiding van Thames & Kosmos Robotics Smart Machines: Super Sphere, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.