Thames & Kosmos Green Engineering: Clean Energy & Sustainable Living handleiding

Niet gecategoriseerd

Thames & Kosmos

36 pagina's

PDF beschikbaar

Handleiding

Assembly

Assemble the

interior of the

model house

You will need

– Model house punch boards 1, 2, and 3

– Printed screen film

– Silicone hose

– Wall-mounted hose holder

– Thermometer strip

– Water pump with cable

– LED set

– Glue stick or craft glue

– Tape

– Ruler and scissors

Here’s how

1. If your house looks like the model in

figure 1, it is now time to assemble the

parts inside. Separate the screen frame

part (figure 1b) from punch board 3 and

remove the interior.

2. Fold the screen frame at the pre-scored

edges. Add glue around the inside of the

screen frame, as shown in figure 2. Then

place the printed screen film on top of the

glue and press down around the edges.

3. Insert the screen with the tabs at the top

and bottom through the slots on the inside of

the right side of the house (figure 3). Attach

the upper tab to the outside of the house

using tab A from punch board 2.

ASSEMBLY

Bekijk gratis de handleiding van Thames & Kosmos Green Engineering: Clean Energy & Sustainable Living, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.