Thames & Kosmos Green Engineering: Clean Energy & Sustainable Living handleiding

Niet gecategoriseerd

Thames & Kosmos

36 pagina's

PDF beschikbaar

Handleiding

Assembling the

model house

You will need

– Model house punch boards 1 and 2

Here’s how

1. Press the house front and right side out of

punch board 1.

2. Press the windows and small cutouts out of

the house front. Optional: you can use the

parts marked with red Xs to make furniture

for your house.

3. The part marked in red in figure 3 will

become the door handle for the door

below. Insert the shorter side into the slot

in the door.

4. Now press the back of the house out of

punch board 2. Remove the large part

marked with a red X in figure 4 and keep it.

You will need it later!

5. Fold the front of the house away from the

right side, and form a right angle. Repeat

with the back of the house and the left

side.

6. Put the house together at the two open

edges using the tabs provided, as shown

in figure 6.

7. Insert part B from punch board 1 into the

slots in the left and right walls to create a

roof beam.

ASSEMBLY

Bekijk gratis de handleiding van Thames & Kosmos Green Engineering: Clean Energy & Sustainable Living, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.