Tenda i36 handleiding
Handleiding
Je bekijkt pagina 28 van 111
22
Document Version: V1.3
You can modify the management IP address and subnet mask.
Parameter description
Parameter
Description
Management IP address
Specifies the management IP address of the AP. You can log in to the web UI of
the AP through this IP address.
Subnet Mask
Specifies the subnet mask of the management IP address.
6.3 Configure intelligent DHCP service
6.3.1 Overview
In a network environment without the DHCP server, you can use the intelligent DHCP service
function. With the function enabled, the AP acts as a DHCP server to automatically assign IP
addresses to clients connected to the AP. The assigned IP address resides in the same subnet as the
AP's management address, allowing clients to access the AP management page using the
management IP address. When a DHCP server exists in the network, the intelligent DHCP service
status will be automatically disabled.
6.3.2 Set intelligent DHCP service
1. Log in to the web UI of the AP, and navigate to Internet Settings > Intelligent DHCP Service >
Intelligent DHCP Service.
2. Enable the Intelligent DHCP Service function.
3. Set parameters as required.
4. Click Save.
Bekijk gratis de handleiding van Tenda i36, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tenda |
| Model | i36 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18170 MB |
