Tenda EE3 Pro handleiding
Handleiding
Je bekijkt pagina 41 van 159
34
Document version: V1.0
3.3 Extend Wi-Fi networks that do not support
Tenda Wi-Fi + Mesh
By default, the mesh device work in the router mode. If you want to bridge another Wi-Fi network
that does not support Tenda Wi-Fi + Mesh, you can change the working mode of the mesh device
to Client+AP mode.
3.3.1 Via web browser
To extend Wi-Fi networks that do not support Tenda Wi-Fi + Mesh:
1. Place the router near the existing router and power it on.
2. If there is an Ethernet cable between the router and the upstream router, unplug it.
3. Launch a web browser from a computer or mobile device that is connected to your NOVA
network.
4. Enter tendawifi.com.
A login window displays.
5. Enter the login password.
The password is case-sensitive.
6. Go to More > Working Mode.
7. Click Switch Mode to the right of the Client+AP Mode field and click OK.
8. Select the Wi-Fi to be extended, which is @Tenda_XXXX_XX in this example. If the 2.4 GHz Wi-
Fi name and 5 GHz Wi-Fi name is the same, select it as required. Enter Upstream WiFi
Password, if asked, then click Connect.
Wait until the device is restarted.
Bekijk gratis de handleiding van Tenda EE3 Pro, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tenda |
| Model | EE3 Pro |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 24960 MB |
