Tenda EE3 Pro handleiding
Handleiding
Je bekijkt pagina 23 van 159
16
Document version: V1.0
---End
Using web user interface
1. Power on the router with the mesh function (new node) and long-press (8 seconds) the reset
button to reset it. Then, place the device within 3 meters of the networked node (primary node
or networked secondary node).
Wait until the indicator of new node blinks green.
2. Launch a web browser from a computer or mobile device that is connected to your NOVA
network.
3. Enter tendawifi.com.
A login window displays.
4. Enter the login password.
The password is case-sensitive.
5. Add new node.
Computer:
1)
Go to Network Status, click (below Network Topology), click Next > Next , then click
Scanning networking.
2) Follow the instructions displayed to complete the configuration.
Smartphone/Tablet:
1)
Go to Network Status, tap , wait until the page prompts you the following nodes had
been discovered, choose the target node, then tap Start.
2) Wait until the ongoing process is complete, if you want to add other nodes, tap Continue
to add new Mesh nodes, otherwise, tap Ok.
You can identify the device to be added by the MAC address on the router label.
---End
You can see the added node in the Network Topology field when the node is added successfully.
Using Tenda WiFi App
1. Power on the router with the mesh function (new node) and long-press (8 seconds) the reset
button to reset it. Then, place the device within 3 meters of the networked node (primary node
or networked secondary node).
Wait until the indicator of new node blinks green.
2. Run the Tenda WiFi App, then tap your router (primary node) on Homepage.
Bekijk gratis de handleiding van Tenda EE3 Pro, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tenda |
| Model | EE3 Pro |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 24960 MB |
