Tenda EE3 Pro handleiding
Handleiding
Je bekijkt pagina 21 van 159
14
Document version: V1.0
The nodes must be compatible with Tenda Wi-Fi + Mesh networking functionality. Firmware upgrades may
be required.
2.4.1 Add more nodes
You can use wired or wireless networking to add nodes.
For nodes in the same package
If the mesh device to be added is in the same package with the primary node, refer to the following
instructions.
Method 1: Wireless networking
Place new nodes within 3 meters of the networked node (primary node or networked
secondary node), and then power on new nodes.
Method 2: Wired networking
Power on new nodes and wait for indicator blinking green slowly, then use an Ethernet cable to
connect the LAN port of a networked node (primary node or networked secondary node) to any
Ethernet port of the new nodes.
When the indicators of added nodes light solid green, the networking is successful. These added
nodes become secondary nodes of the network.
You can relocate the added secondary nodes to gain wider Wi-Fi coverage. See Position secondary
node.
If networking fails (the indicator blinks green slowly for more than 3 minutes), try the following methods to
solve it:
Ensure that all nodes are powered on.
Ensure that only one node (the primary node) is connected to the internet while other nodes are in
factory settings.
Move the new node closer to the networked node.
For nodes in a different package
The nodes must be compatible with Tenda Wi-Fi + Mesh networking functionality. Firmware upgrades
may be required.
A maximum of eight secondary nodes can be added to a mesh network.
Bekijk gratis de handleiding van Tenda EE3 Pro, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tenda |
| Model | EE3 Pro |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 24960 MB |
