Tektronix TBS1052C handleiding
Handleiding
Je bekijkt pagina 71 van 146
Once you are displaying a
waveform area of interest at
the center of the screen, adjust
the Horizontal Scale knob to
acquire more points for the
area of interest, and use the
controls to view more detail.
Push the Set Horizontal
Position to 0s side-menu
button to return the trigger
point to the center of the
waveform record (setting delay
to 0). Pushing this button does
not turn off the delay mode.
Y
ou can also push the front-
panel Horizontal Position knob
to return the trigger point to
the center of the waveform
record.
Trigger Delay is different than Trigger Holdoff. See Holdoff trigger mode on page 54.
Setting the record length
Use this procedure to set the record length. The record length sets how many samples (data points) are added to a waveform record.
Available record lengths are 1000, 2000, 20,000 points.
Push Acquire.
Push the Record Length side-
menu button.
Use the Multipurpose knob
to select and set the record
length.
Acquisition setup
TBS1000C Series Oscilloscopes User Manual 73
Bekijk gratis de handleiding van Tektronix TBS1052C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tektronix |
| Model | TBS1052C |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 35612 MB |