Handleiding
Je bekijkt pagina 43 van 104
43
User’s Guide
English
WARNING
Clean any spillages or excess dirt from the
inside, as these could ignite during the py-
rolysis and create a fire hazard.
WARNING
Before running the pyrolytic function, ensure
that the oven is properly closed.
1. Turn the cooking control dial to the Pyrolysis
position
.
2. TAfter a few seconds, the
symbol will
light up on the clock display, reading ‘P2’
(Pyrolysis programme 2.
3. You can now change the pyrolysis pro-
gramme to P1, P2 or P3 by pressing the
or
keys:
P1: Light pyrolysis. Lasts 1 hour.
P2: Regular pyrolysis. Lasts 1 hour 30 min.
P3: Intensive pyrolysis. Lasts 2 hours.
4. Oncethedesiredprogrammehasbeense-
lected, press
. The automatic door lock
will be activated immediately.
WARNING
If the door is not properly closed, it will not
lock and an alarm will sound.
If this happens, switch off the alarm by
pressing any clock button, close the door
properly, turn the function dial to the
posi-
tion and re-select the pyrolytic programme
as described above.
5. Oncethedoorislocked,the
symbol will
light up on the clock display and the time re-
maining before the end of the pyrolysis will ap-
pear.
IMPORTANT
At this point, the oven is programmed and
the pyrolytic cleaning cycle is under way.
During the cycle, none of the oven timer
functions may be chosen (except the child
lock).
Do not try to open the oven door as this may
interrupt the cleaning process.
6. When the pyrolytic cleaning cycle has fin-
ished, an alarm will sound, the
symbol
will flash and you will see the time ‘0:00’ on
the clock display.
7. Press any of the timer’s keys to disable the
alarm.
8. Turn the control dial to the
position.
9. The oven’s heating process has finished.
However, the oven is extremely hot and can-
not be used.
The cooling process will continue to operate
and the
symbol will remain lit until the
oven cools down.
IMPORTANT
As a result of the high temperatures inside
the oven, the cooling process may vary de-
pending on the room temperature.
10. Oncetheovenhascooleddown,the
symbol will turn off.
11. Open the oven door and wipe the inside
with a damp cloth, removing the ash from
the cleaning cycle. Hard-to-reach areas
in the oven will need to be cleaned with a
non-metallic fibre scourer.
12. Once the oven is clean, do not forget to
replace the supports and accessories.
13. The oven is now ready to be used.
Bekijk gratis de handleiding van Teka HSB 6456, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Teka |
| Model | HSB 6456 |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 12891 MB |
