Handleiding
Je bekijkt pagina 42 van 104
42
User’s Guide
Pyrolytic self-cleaning function
Function available in pyrolytic models HSB P.
WARNING
Before setting the pyrolytic cleaning cycle,
carefully read the safety instructions, which
you will find at the start of the Installation and
Maintenance guide.
This function allows you to carry out a pyrolytic
cleaning cycle during which, due to the high
temperatures reached inside the oven, ac-
cumulated grease undergoes a carbonisation
process.
The general recommendation is to perform a
pyrolytic cycle every 4-5 uses, using the most
suitable programme according to the level of
stains present in the oven. The more stained
the oven, the longer the duration of the pro-
gramme.
During the pyrolytic cycle the light inside the
oven will remain off.
PROGRAMMING
THE PYROLYTIC FUNCTION
IMPORTANT
Before carrying out the pyrolysis, you must
remove all accessories and dishes from the
oven, including the shelves and/or telescop-
ic guide rails. To do this, follow the instruc-
tions in the installation and maintenance
guide accompanying the oven.
bol will flash slowly and the time remaining to
complete the cycle will appear on the display.
IMPORTANT
The duration of this cycle cannot be changed.
To stop the cycle before it is finished, turn
the control dial to the
position.
5. When the cycle is finished, the oven will turn
itself off, an alarm will sound and the
symbol will flash quickly.
IMPORTANT
Do not open the oven door until the Hydro-
clean
®
function is complete.
The cooling cycle is necessary for the func-
tion to work properly.
6. Touch any sensor with your fingertip to stop
the alarm and turn off the
symbol.
7. Turn the control dial to the
position.
8. Any traces of dirt and excess water can now
be removed from the oven with the damp
cloth.
The Hydroclean
®
function takes place at a low
temperature. However, cooling times can vary
depending on the room temperature.
WARNING
Before touching the inside surface of the
oven, make sure that it has cooled properly.
If a deeper clean is required after using the Hy-
droclean
®
function, use neutral detergents and
non-abrasive sponges.
Bekijk gratis de handleiding van Teka HSB 6456, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Teka |
| Model | HSB 6456 |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 12891 MB |
