Handleiding
Je bekijkt pagina 44 van 104
44
User’s Guide
IMPORTANT
If any incident is detected in the program-
ming or use of this function, consult the in-
stallation and maintenance guide included
with your oven.
CANCELLING THE PYROLYTIC FUNCTION
Pyrolysis is an automatic function and there-
fore it can only be activated from the timer
programme. To cancel a pyrolysis in progress
it is necessary to reset the oven, following the
instructions below:
1. Set the control dial to the
position.
The timer display will appear as follows
2. Depending on the internal temperature of the
oven, either of the two following situations
could arise:
a) Dangerous internal temperature: In this
case, the door will remain locked until the
temperature reaches safe levels.
b) Safe internal temperature: If the tempera-
ture inside the oven is safe, the door will
be unlocked immediately.
3. Oncethedoorhasbeenunlockedandcan
be opened, the time will show once again on
the timer display.
POWER SUPPLY FAULT DURING PYROL-
YSIS PROCESS
If there is a power cut during the pyrolysis pro-
cess, when the power is restored the following
is displayed on the oven screen:
In this state, set the control dial in position .
If the temperature of the oven is safe, it will au-
tomatically unblock.
However, if the oven temperature is not yet
safe, the oven will cool down and unlock auto-
matically after one hour.
If the door has not unlocked after this time, dis-
connect the oven from the main power supply,
reconnect it and try to unlock it manually, fol-
lowing the steps in the chapter “Manual door
lock”
Bekijk gratis de handleiding van Teka HSB 6456, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Teka |
| Model | HSB 6456 |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 12891 MB |
