Tascam FR-AV2 handleiding
Handleiding
Je bekijkt pagina 34 van 72
34 TASCAM FR-AV2 V1.00
6. I/O SETTINGS
6-3. Using the mid-side decoding
function
Mid-side mics can be used for recording, and their recordings
played back.
See “Connecting mid-side mics” on page 25 for details about
connecting mid-side mics.
Connection settings
Set the jacks that the mid-side mics are connected to using the
MENU screen > I/O SETTINGS > MS DECODE item.
HOME screen when stopped
e
Press the F1[MENU] button. Select I/O SETTINGS >
MS DECODE and press the
F4[ENTER] button.
OFF (default)
The mid-side decoding function will not be used. Recording
will occur in ordinary mode.
REC
This mode decodes while recording. Playback is conducted
without decoding.
MONITOR
Record mid-side mic output without decoding for decoding later.
Use this mode to monitor when recording with mid-side mics.
Use this also when playing back mid-side les that were
recorded without decoding.
NOTE
o The mid-side decoding function can be used when inputting
mid-side mics through the 1/2 input jacks and when using
this unit to play imported les recorded using mid-side mics.
Turn the mid-side decoding function o to not use it.
o Always stereo-link the inputs to which mid-side decoding is
applied. See “Stereo linking (STEREO LINK)” on page 31 for
operation procedures.
Adjusting mid and side levels
I/O SETTINGS screen
e
Select WIDE and press the
F4[ENTER] button.
Use the F2[hPARAM] and
F3[PARAM7] buttons
to adjust the width of the
sound.
o At 0, the sound will be 100% mid (M). The amount of side (S)
increases with the value. The default value is 50%.
Bekijk gratis de handleiding van Tascam FR-AV2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tascam |
| Model | FR-AV2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8478 MB |
