Tascam FR-AV2 handleiding
Handleiding
Je bekijkt pagina 33 van 72
TASCAM FR-AV2 V1.00 33
6. I/O SETTINGS
6-2. Setting the phantom power
voltage
Press the F1[MENU] button when the unit is stopped and
the HOME screen is open and open the MENU screen >
I/O SETTINGS screen.
I/O SETTINGS screen
e
Select PHANTOM VOLTAGE
and press the F4[ENTER]
button.
Select the voltage and press
the F4[ENTER] button.
NOTE
o Turn phantom power output on/ o on the INPUT SETTINGS
screen. (“Using phantom power (PHANTOM)” on page 31)
o The default value is “+48V”.
o Battery power will be consumed faster when set to “+48V”
than when set to “+24V”.
CAUTION
o Do not connect or disconnect mics with the INPUT 1/2 jacks
when phantom power is on. Doing so could cause a loud
noise and might damage this unit and connected equipment.
o Turn phantom power ON only when using a condenser
microphone that requires phantom power. Turning phantom
power on when a dynamic mic or other external device that
does not require it is connected could damage this unit and
the connected equipment.
o When using condenser mics that require phantom power and
dynamic mics together, be sure to use balanced dynamic mics.
Unbalanced dynamic mics cannot be used when phantom
power is enabled.
o Supplying phantom power to some ribbon mics could break
them. If you are unsure, do not supply phantom power to a
ribbon mic.
o Some condenser microphones will not operate when phantom
power is set to “+24V”.
o Battery operation time will change according to the mics
being used. For details, refer to the operation manual of the
mic, for example.
o When using phantom power while running on batteries, the
operation time might be reduced greatly depending on the
mics being used. We recommend using a TASCAM PS-P520U
AC adapter (sold separately).
Furthermore, when using an adapter that does not meet
the recommended specications, supplying phantom
power to multiple inputs could cause the power to turn o
automatically.
o Do not connect or disconnect the AC adapter when using
phantom power. The unit could turn o even when batteries
are installed, resulting in recorded data becoming damaged
or lost.
o When using USB bus power, the unit might not be able to
supply phantom power depending on the computer. In this
case, set the unit to use battery power.
Bekijk gratis de handleiding van Tascam FR-AV2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tascam |
| Model | FR-AV2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8478 MB |
