Supermicro X14SBT-GAP handleiding
Handleiding
Je bekijkt pagina 114 van 142
When this feature has been previously set to Enabled, the options are Enabled and Reset. To
disable the USB Security Policy, set this feature to Reset. When this feature is set to Reset, the
system and TCG NVMe devices chosen in "Super-Guardians Protection Policy" will be in the
unprotected mode.
System Diagnostics Configuration Menu
►System Diagnostics Configuration
Launch System Diagnostics
Set this feature to Launch Once to launch system diagnostics on next system boot. The options
are Disabled and Launch Once.
Note: Pressing <F7> during system bootup can also launch system diagnostics.
Intel(R) Ethernet Controller Menu
►Intel (R) Ethernet Controller (Ethernet controller) - (MAC
address)
Notes:
l
The Ethernet controller and MAC addresses shown above are based on your system
features.
l
This submenu is available when "Onboard LAN1 Option ROM" is set to EFI.
►NIC Configuration
Link Speed
Use this feature to set the connection speed of a LAN port specified. The options are Auto
Negotiated, 10 Mbps Half, 10 Mbps Full, 100 Mbps Half, and 100 Mbps Full.
Wake On LAN
Set this feature to support system wake-up via the selected LAN device. If this feature is set
to Enabled, the LAN port selected will be enabled when the system is powered on. The
options are Disabled and Enabled.
114
X14SBT-GAP: UEFI BIOS
Bekijk gratis de handleiding van Supermicro X14SBT-GAP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Supermicro |
| Model | X14SBT-GAP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15560 MB |
