Supermicro X14SBT-GAP handleiding
Handleiding
Je bekijkt pagina 113 van 142
When this feature has previously been set to Enabled, the options are Enabled and Reset. To
disable the TPM Security Policy, set this feature to Reset. When this feature is set to reset, the
system and TCG NVMe devices chosen in "Super-Guardians Protection Policy" will be in the
unprotected mode.
Load Authentication- Key (Available when "KMS Security Policy," "TPM Security
Policy," and "USB Security Policy" are set to Disabled)
The options are Disabled and Enabled. Set this feature to Enabled. Changes take effect after
you save settings and reboot the system. While booting, the BIOS will automatically load the
Authentication-Key (filename: TPMAuth.bin) from the USB flash drive. Afterwards, the default
setting will be set to Disabled by the BIOS.
Notes:
l
Be sure to connect a USB flash drive with the Authentication-Key (filename:
TPMAuth.bin) to your system before the system reboot.
l
Be sure to save the Authentication-Key (filename: TPMAuth.bin) to the USB flash
drive and have a backup. Please load the Authentication-Key (filename:
TPMAuth.bin) after the TPM (either onboard or external) is detected by your system.
Otherwise, the TPM function can not work properly.
Save Authentication-Key (Available when "TPM Security Policy" is set to Enabled)
The options are Disabled and Enabled. Set this feature to Enabled. Changes take effect after
you save settings and reboot the system. While booting, the BIOS will automatically save the
Authentication-Key (filename: TPMAuth.bin) to the USB flash drive. Afterwards, the default
setting will be set to Disabled by the BIOS.
Note: Be sure to connect a USB flash drive to your system before the system reboot.
USB Security Policy (Available when "KMS Security Policy" and "TPM Security Policy"
are set to Disabled)
Use this feature to enable the USB Security Policy. The options are Disabled and Enabled. Set
this feature to Enabled. Changes take effect after you save settings and reboot the system.
Connect a USB flash drive to your system before the system reboot. While booting, the BIOS
will automatically create the USB Authentication-Key (filename: USBAuth.bin) and save it to
the USB flash drive.
Note: Be sure to connect a USB flash drive to your system before configuring this feature.
Save the USB Authentication-Key (filename: USBAuth.bin) to the USB flash drive and keep
a backup.
113
X14SBT-GAP: UEFI BIOS
Bekijk gratis de handleiding van Supermicro X14SBT-GAP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Supermicro |
| Model | X14SBT-GAP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15560 MB |
