Supermicro X14SBT-GAP handleiding
Handleiding
Je bekijkt pagina 115 van 142
LLDP Agent
Use this feature to enable or disable Link Layer Discovery Protocol (LLDP) agent support on
a long-term basis. The LLDP, a vendor-neutral link layer protocol, is used by a network
device to identify itself and announce its capability to the neighboring devices in a network
environment for networking. When disabling the LLDP agent in the firmware, the function of
Data Center Bridging (DCB) will also be disabled. The options are Disabled and Enabled.
Blink LEDs
Use this feature to identify the physical network port by blinking the associated LED. The
default setting is 0 (up to 15 seconds).
The following information is displayed.
l
UEFI Driver
l
Adapter PBA
l
Device Name
l
Chip Type
l
PCI Device ID
l
PCI Address
l
Link Status
l
MAC Address
l
Virtual MAC Address
TLS Authenticate Configuration Menu
►TLS Authenticate Configuration
This submenu allows you to configure Transport Layer Security (TLS) settings.
►Server CA Configuration
This feature allows you to configure the client certificate that is to be used by the server.
►Enroll Certification
This feature allows you to enroll the certificate in the system.
►Enroll Certification Using File
This feature allows you to enroll the security certificate in the system by using a file.
115
X14SBT-GAP: UEFI BIOS
Bekijk gratis de handleiding van Supermicro X14SBT-GAP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Supermicro |
| Model | X14SBT-GAP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15560 MB |
