Supermicro X14SBH-AP handleiding
Handleiding
Je bekijkt pagina 58 van 140
For a detailed diagram of the X14SBH- AP motherboard, see the layout under "Quick
Reference" on page 12.
LAN1/LAN2 LED
LED States
Color State
NIC 2: Blinking green LAN 2: Active
NIC 1: Blinking green LAN 1: Active
Storage Drive Activity LED
The storage drive activity LED connection is located on pin 7 of JFP1 on the X14SBH-AP
motherboard. When this LED is blinking green, it indicates storage drive activity.
For a detailed diagram of the X14SBH- AP motherboard, see the layout under "Quick
Reference" on page 12.
Storage Drive Activity LED
LED State
Color State
Blinking Green Storage Drive Activity
Standby Power LED
The LED indicator for standby power is located on pin 8 of JFP1 on the X14SBH- AP
motherboard. If this LED is on, standby power is on.
For a detailed diagram of the X14SBH- AP motherboard, see the layout under "Quick
Reference" on page 12.
Root of Trust (RoT) Power LED
The Power LED for the Root of Trust (RoT) connection is located on pin 9 of JFP1 on the
X14SBH-AP motherboard. If this LED is on, power for the RoT chip is on.
For a detailed diagram of the X14SBH- AP motherboard, see the layout under "Quick
Reference" on page 12.
Standby Power
A Standby Power (I²C) connection is located on pins 10–14 of JFP1 on the X14SBH-AP
motherboard to provide power to the system when it is in standby mode.
For a detailed diagram of the X14SBH- AP motherboard, see the layout under "Quick
Reference" on page 12.
58
X14SBH-AP: Component Installation
Bekijk gratis de handleiding van Supermicro X14SBH-AP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Supermicro |
| Model | X14SBH-AP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17647 MB |
