Supermicro X14SBH-AP handleiding
Handleiding
Je bekijkt pagina 55 van 140
For a detailed diagram of the X14SBH- AP motherboard, see the layout under "Quick
Reference" on page 12.
VROC RAID Key Header
A VROC RAID Key header is located at JRK1 on the X14SBH-AP motherboard. Install a VROC
RAID key on JRK1 for NVMe RAID support as shown in the illustration below.
For a detailed diagram of the X14SBH- AP motherboard, see the layout under "Quick
Reference" on page 12.
Intel VROC Key
Pin Definitions:
Four Total
Pin# Definition
1 GND
2 +3.3 V Standby
3 GND
4 CPU RAID Key
Note: Images displayed are for illustrative purposes only. The components installed in your
system may or may not look exactly the same as the graphics shown in the manual.
Note: For detailed instructions on how to configure VROC RAID settings, refer to the VROC
RAID Configuration User's Guide posted on the web page under the following link:
https://www.supermicro.com/support/manuals.
Front Control Panel
There is a front control panel header located on this motherboard. The front control panel
header, located at JFP1, contains header pins for various buttons and LED indicators with I²C
support for front access. This head is designed specifically for use with the Supermicro chassis.
For a detailed diagram of the X14SBH- AP motherboard, see the layout under "Quick
Reference" on page 12.
55
X14SBH-AP: Component Installation
Bekijk gratis de handleiding van Supermicro X14SBH-AP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Supermicro |
| Model | X14SBH-AP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17647 MB |
