Supermicro X14DBT-FAP handleiding
Handleiding
Je bekijkt pagina 56 van 137
For a detailed diagram of the X14DBT-FAP/-FLAP motherboard, see the layout under "Quick
Reference" on page 12.
UID Switch/Reset Button Select Jumper (JRU1)
Jumper Settings
State Description
Close pins 1 and 2 of JRU1 Used for UID switch support
Close pins 2 and 3 of JRU1 Used for System Reset support
LED Indicators
For information about the LED indicators on the X14DBT-FAP/-FLAP motherboard, refer to the
following content.
BMC Heartbeat LED
A BMC Heartbeat LED is located at LEDM1 on the X14DBT-FAP/-FLAP motherboard. When
this LED is blinking, the BMC is functioning normally. During a BMC Reset or a Cold Boot,
LEDM1 will turn solid green.
For a detailed diagram of the X14DBT-FAP/-FLAP motherboard, see the layout under "Quick
Reference" on page 12.
BMC Heartbeat LED Indicator
LED Color Definition
Green: Blinking BMC Normal
Unit ID (UID) LED
The UID LED indicator is located at LED5 on the X14DBT-FAP/-FLAP motherboard. This UID
indicator provides easy identification of a system that may need services.
For a detailed diagram of the X14DBT-FAP/-FLAP motherboard, see the layout under "Quick
Reference" on page 12.
UID LED
LED Indicator
LED Color Definitions
Blue: On System Identified
56
X14DBT-FAP/-FLAP: Component Installation
Bekijk gratis de handleiding van Supermicro X14DBT-FAP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Supermicro |
| Model | X14DBT-FAP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14774 MB |
