Supermicro X14DBT-FAP handleiding
Handleiding
Je bekijkt pagina 54 van 137
I/O Port Function Description
JAIOM1 (P1-AIOM
PCIe 5.0 x16)
Advanced I/O Module
(AIOM) for I/O Support
Provides input/output connections on the I/O
face of your system
JVGA1 VGA Port
Provides analog interface support between the
computer and the video displays
JUSB1 (USB0/1)
Universal Serial Bus
(USB) 2.0 Ports
Provides USB support via USB cables (not
included)
Jumper Settings
To modify the operation of the motherboard, jumpers can be used to choose between optional
settings. Jumpers create shorts between two pins to change the function of the connector. Pin
1 is identified with a square solder pad on the printed circuit board. See the diagram below for
an example of jumping pins 1 and 2. Refer to the motherboard layout page for jumper locations.
Note: On two-pin jumpers, "Closed" means the jumper is on and "Open" means the jumper
is off the pins.
CMOS Clear
JBT1 on the X14DBT-FAP/-FLAP motherboard is used to clear CMOS, which will also clear
any passwords. Instead of pins, this jumper consists of contact pads to prevent accidentally
clearing the contents of CMOS.
For a detailed diagram of the X14DBT-FAP/-FLAP motherboard, see the layout under "Quick
Reference" on page 12.
54
X14DBT-FAP/-FLAP: Component Installation
Bekijk gratis de handleiding van Supermicro X14DBT-FAP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Supermicro |
| Model | X14DBT-FAP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14774 MB |
