Supermicro X14DBT-FAP handleiding
Handleiding
Je bekijkt pagina 53 van 137
VRM Header
A Voltage Regulator Module (VRM) header is located at JVRM1 on the X14DBT-FAP/-FLAP
motherboard. The VRM header adjusts the voltages heading to the processor and other
components to prevent exceeded or insufficient voltage supplies.
For a detailed diagram of the X14DBT-FAP/-FLAP motherboard, see the layout under "Quick
Reference" on page 12.
VROC RAID Key Header
A VROC RAID Key header is located at JRK1 on the X14DBT-FAP/-FLAP motherboard. Install
a VROC RAID key on JRK1 for NVMe RAID support as shown in the illustration below.
For a detailed diagram of the X14DBT-FAP/-FLAP motherboard, see the layout under "Quick
Reference" on page 12.
Intel VROC Key
Pin Definitions:
Four Total
Pin# Definition
1 GND
2 +3.3 V Standby
3 GND
4 CPU RAID Key
Note: Images displayed are for illustrative purposes only. The components installed in your
system may or may not look exactly the same as the graphics shown in the manual.
Note: For detailed instructions on how to configure VROC RAID settings, refer to the VROC
RAID Configuration User's Guide posted on the web page under the following link:
https://www.supermicro.com/support/manuals.
I/O Ports
For information about the I/O connectors and ports of the X14DBT-FAP/-FLAP motherboard,
refer to the following content.
53
X14DBT-FAP/-FLAP: Component Installation
Bekijk gratis de handleiding van Supermicro X14DBT-FAP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Supermicro |
| Model | X14DBT-FAP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14774 MB |
