Supermicro X14DBT-FAP handleiding

137 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 51 van 137
For a detailed diagram of the X14DBT-FAP/-FLAP motherboard, see the layout under "Quick
Reference" on page 12.
Liquid Cooling Leakage Sensor Headers
Liquid cooling leakage sensor headers are located at JLCS1 and JLCS2 on the X14DBT-FAP/-
FLAP motherboard. This header is reserved for liquid cooling support in systems. Liquid
cooling leakage sensor headers are used to detect leakage of the coolant used in your liquid
cooling system.
For a detailed diagram of the X14DBT-FAP/-FLAP motherboard, see the layout under "Quick
Reference" on page 12.
M.2 Boot Tray Connector
Use the PCIe 5.0 x8 connector located at JPCIE3 on the X14DBT-FAP/-FLAP motherboard to
connect an M.2 boot tray.
For a detailed diagram of the X14DBT-FAP/-FLAP motherboard, see the layout under "Quick
Reference" on page 12.
MCIO PCIe 5.0 x8 Connectors
Mini Cool Edge IO (MCIO) PCIe 5.0 x8 connectors are located at JPCIE1A1 (P2_PE0 0-7),
JPCIE1B1 (P2_ PE0 8- 15), and JPCIE2A1 (P2_ PE1 15- 8) on the X14DBT- FAP/- FLAP
motherboard.
For a detailed diagram of the X14DBT-FAP/-FLAP motherboard, see the layout under "Quick
Reference" on page 12.
Motherboard CPLD Header
A Motherboard Complex Programmable Logic Device header, located at JPRG1 on the side of
the X14DBT- FAP/- FLAP motherboard, allows for engineering programming for
firmware/software performance.
For a detailed diagram of the X14DBT-FAP/-FLAP motherboard, see the layout under Quick
Reference.
NC-SI Connection
The Network Controller Sideband Interface (NC-SI) connection is located at JNCSI1 on the
X14DBT-FAP/-FLAP motherboard. This connection is used to connect a Network Interface
Card (NIC) to the motherboard to allow the onboard Baseboard Management Controller (BMC)
to communicate with a network.
51
X14DBT-FAP/-FLAP: Component Installation

Bekijk gratis de handleiding van Supermicro X14DBT-FAP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkSupermicro
ModelX14DBT-FAP
CategorieNiet gecategoriseerd
TaalNederlands
Grootte14774 MB