Supermicro SuperServer SYS-5019D-4C-FN8TP Handleiding (128 Pagina's)

Handleiding

16

SuperServer 5019D-4C-FN8TP User's Manual

Chapter 2

Server Installation

2.1 Overview

This chapter provides advice and instructions for mounting your system in a server rack. If

your system is not already fully integrated with processors, system memory, etc., refer to

Chapter 4 for details on installing those components.

Caution: Electrostatic Discharge (ESD) can damage electronic components. To prevent such

damage to PCBs (printed circuit boards), use a grounded wrist strap, handle all PCBs by their

edges, and keep them in anti-static bags when not in use.

2.2 Preparing for Setup

The box in which the system was shipped includes the screws needed to install the server

into a rack. Read this section in its entirety before you begin the installation.

Choosing a Setup Location

• The system should be situated in a clean, dust-free area that is well ventilated. Avoid areas

where heat, electrical noise, and electromagnetic elds are generated.

• Leave at least 25 inches of clearance in front of the rack so that you can open the front

door completely. Leave approximately 30 inches of clearance behind the rack to allow suf-

cient space for airow and access when servicing.

• This product should be installed only in a Restricted Access Location (dedicated equipment

rooms, service closets, etc.).

• This product is not suitable for use with visual display workplace devices according to §2

of the German Ordinance for Work with Visual Display Units.

Rack Precautions

• Verify that the leveling jacks on the bottom of the rack are extended to the oor so that

the full weight of the rack rests on them.

Bekijk gratis de handleiding van Supermicro SuperServer SYS-5019D-4C-FN8TP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.