Supermicro SuperServer SYS-5019D-4C-FN8TP Handleiding (128 Pagina's)

Handleiding

Chapter 2: Server Installation

17

• In single-rack installations, stabilizers should be attached to the rack. In multi-rack instal-

lations, the racks should be coupled together.

• Always verify that the rack is stable before extending a server or other component from

the rack.

• You should extend only one server or component at a time. Extending two or more simul-

taneously might cause the rack to become unstable.

Server Precautions

• Review the electrical and general safety precautions in Appendix B.

• Determine the placement of each component in the rack before you install the rails.

• Install the heaviest server components at the bottom of the rack rst. Subsequent com-

ponents should be installed in decreasing order of weight with the lightest component at

the top.

• Use a regulating uninterruptible power supply (UPS) to protect the server from power

surges and voltage spikes and to keep your system operating in case of a power failure.

• Allow any drives and power supply modules to cool before touching them.

• When not servicing, always keep the front door of the rack and all covers and panels

closed to maintain proper cooling.

Rack Mounting Considerations

Ambient Operating Temperature

If installed in a closed or multi-unit rack assembly, the ambient operating temperature of

the rack environment might be greater than the room's ambient temperature. Therefore,

consideration should be given to installing the equipment in an environment compatible with

the manufacturer’s maximum rated ambient temperature (TMRA).

Airow

Equipment should be mounted into a rack so that the amount of airow required for safe

operation is not compromised.

Bekijk gratis de handleiding van Supermicro SuperServer SYS-5019D-4C-FN8TP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.