Supermicro SuperBlade SBA-4114S-T2N handleiding
Handleiding
Je bekijkt pagina 23 van 100
23
Chapter 2: Installation and Setup
Installing the Processor and Heatsink
Begin by removing power from the system as described in Section 2.3.
1. Use a Torx T20 driver to loosen the screws holding down Force Frame in the sequence
of 3-2-1. The screws are numbered on the Force Frame next to each screw hole.
Tighten to 16.1 kgf-cm (14 lbf-in) of torque.
Screw #1
Screw #2
Screw #3
Force Frame
Figure 2-3. Removing the Processor Force Frame
Bekijk gratis de handleiding van Supermicro SuperBlade SBA-4114S-T2N, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Supermicro |
| Model | SuperBlade SBA-4114S-T2N |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17306 MB |
