Supermicro SuperBlade SBA-4114S-T2N Handleiding (100 Pagina's)

Handleiding

19

Chapter 2: Installation and Setup

Removing a Blade Unit from the Enclosure

A blade can be removed from the enclosure while other blades continue to operate.

Note: When a blade is removed for a length of time, cover the slot with a dummy to ensure

proper airow in the enclosure.

Removing a Blade Unit from the Enclosure

1. Power down the blade unit.

2. Pull open the latch lever and use it to pull the blade from the enclosure.

Figure 2-1. Blade Latch Lever

2.2 Installing or Removing the Blade Unit

Installing a Blade Unit into the Enclosure

1. Pull the latch lever out, and push the blade into its bay. Caution: Insert the blade

carefully so the rear connectors are not damaged.

2. As the blade is seated in the enclosure, push the lever into its locked position.

Latch Lever

Bekijk gratis de handleiding van Supermicro SuperBlade SBA-4114S-T2N, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.